Hall-research VSM-I-A-4-JA4 Manual do Utilizador descarregar pdf (Página 22)

User’s Manual

Change Password?

Allow user to change existing password. When clicked, a new window will pop up for

entering the new password. Password length is limited to eight (8) characters long.

Apply

User must click this button after changing any field on settings tab to save changes.

Factory Reset

This button loads factory defaults to Matrix. It will reset unit to factory default values.

Factory default will also wipe out saved presets.

5.2.4 Factory Default Settings

Field Name in GUI

Default Value

Tab in GUI

Power Off Video

VIDEO INPUT n

Vid_In_n

Labels

AUDIO INPUT n Aud_In_n Labels

VIDEO OUTPUT n

Vid_Out_n

Labels

AUDIO OUTPUT n

Aud_Out_n

Labels

PRESET n

PRESET_n

Labels

Name

VSM Matrix

Settings

Location Hall Research Settings

Assigned by DHCP

Settings

Subnet

Based on IP

Settings

Gateway

Assigned by DHCP

Settings

DHCP

Enabled

Settings

Telnet

Disabled

Settings

Default Password

Pass

Settings

5.3 IP Specific Serial Commands

HSM matrix equipped with IP interface allows user to assign Static IP address using

Serial Interface with standard RS-232. Please refer section 4 to connect PC to Matrix

over serial interface. Once you are connected use following Commands to assign IP

address or load factory defaults.

5.3.1 Change network settings of unit

Note: All commands are case sensitive. Also note that you must specify a new IP

address, followed by SB and GE commands (all 3) for the new IP to take effect

Command: IP xxx.xxx.xxx.xxx« stands for new IP address value.

Success Response: IP= xxx.xxx.xxx.xxx«

Possible error Responses: ERR! IP address not changed (if the specified IP address is

the same as unit’s existing address), or ERR! IP address is not valid. If there is a

problem with new IP address as specified

Command: SB xxx.xxx.xxx.xxx«

stands for new Subnet Mask address value.

Success Response: SB= xxx.xxx.xxx.xxx«

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Comentários a estes Manuais

Sem comentários

Hall-research VSM-I-A-4-JA4 Manual do Utilizador Página 22

Comentários a estes Manuais

Manuais e produtos relacionados com Routers Hall-research VSM-I-A-4-JA4